Read Up Newbies To Bottin' !

[Devestator]

Jason_87 Mine will do that sometimes too. What it is is your computer is taking to long to load diablo before the jsp loader looks for the window. I'm not sure wich delay if any you can change in the config file to make this wait longer?

I tried playing with some of them and didn't seem to get much results.

But now that you know what the problem is maybe you can figure out the solution? lol Or maybe someone else can reply here with wich delay to edit to make it wait longer before looking for the diablo window

 

[WaKe-Up]

HELP

im getting this error message
[23:21:21] INI Successfully Loaded. 1 Diablo Instance will spawn.
[23:21:21] 1:*** Your Diablo II path is incorrect:
[23:21:21] 1:C:\Program Files\Diablo II\Diablo II.exe
[23:21:21] 1:Aborting thread

Ive got the exact location the dll file is and it still says it
Plz if you can help imiadeatly email Factory_of_fear@hotmail.com

 

[DrakenX89]

Can this work for macs too, cause most stuff like this is windows only

 

[Mav]

Ok you might have answered this already but I followed the instructions in the first post did everything in the configs. When i load D2jspLoader.exe it goes into my account selects my char goes into a channel makes a game and then just sits there. Why is this happening and what do i need to do to fix it?

 

[buggers]

HELP ABSOLUTE NOOB AT BOTTING

it says:
[21:27:53] INI Successfully Loaded. 1 Diablo Instance will spawn.
[21:27:53] 1:*** Your D2Hackit.dll path is incorrect:
[21:27:53] 1:C:\Program Files\D2Jsp\d2hackit.dll
[21:27:53] 1:Aborting thread

what do i do thanx for the help

 

[WaKe-Up]

right click the d2hackit.dll file and add the get the location it is stored on your comp.go into d2jspLoader file and find were it has the d2hackit.dll file stored.take away all the shit after the = and add your location of were the file is stored.At very end of the location add d2hackit.dll

 

[doug11]

Originally posted by ro0t
Attention all botters who have NO clue what the crap they are doing:

READ THIS.

Most people know I've been going around posting "http://www.d2jsp.org" all over the place. I don't work for njaguar (JSP creator) nor do I go to other sites and promote the shit out of it. JSP is simply the best (in my opinion) when it comes to bots. I've come in contact with: JSP, OPB, IPB, JED, and a few unheard ones. Most are buggy, hard to configure, smell bad, or newbies get lost in the few .ini files there are. I found JSP to my liking and so I'm going to post this in hopes that all you people will read it and find out what the hell you are doing when it comes to botting.
FAQ will follow at the end of this section.. thanks for reading.

What ya'll (haha.. ya'll.) need: Winzip, the Balls to have Patience, A Brain, and some knowledge of editing (dun dun dun...) regular ini files.

First: Download it! http://www.d2jsp.org/files/d2jsp_v0.24_full.zip

Ok. Once you've unzipped it to somewhere... try to use your brain and not forget where you installed it. This little tidbit might come in handy.

Second: Get Updated. Go Here: http://scripts.d2jsp.org/index.php?pid=3&a=vp&did=49

This file contains the updated Snagit! Release and the script for the most used configuration (pwnage pindle). Extract this so that the files IN the *.ZIP file GO INTO your /scripts/ DIR! THIS IS CRUCIAL! If you can't do this; give up and go home. Else, please do continue.

Third: Personalize.

Find "d2jsp Character Config.exe" in your JSP directory and obviously, open it. This is pretty damned self-explanatory, but if you need help with it: Press the "Add Character" button, type in your Character's name (Case-Sensitive) and set their script name to bots/PwnagePindle.d2j (make sure it's *.D2J).

Fourth: Editing the main files

Fire up your JSP directory and open "D2JSPloader.ini" This is pretty damn important so if you've been slacking before this... get your hand outta your pants and on the keyboard. The first thing you come to is

[Account Settings]
Under "Accountname=" guess what you put next to it? Wrong! Your account name, dumbass. Make sure to spell it right. To the .. Below, you'll see the Character Location matrix. This would be where your character is located when you log into your account and see all your characters. If it's in the upper right corner, you'd put a 2 next to "CharacterLocation=". Set your "Difficulty=" to 3 unless you plan on doing Nightmare or Normal runs. The next should be REAL self explanatory, so I'll just skip [Global Settings]

[Path Settings]
"D2Hackit=" Set this, WITH D2Hackit.DLL IN THE PATH! (eg- c:\program files\jsp\d2hackit.dll) Leave "D2Parameter=" alone. D2Path should be set to your Diablo II file: eg c:\diablo ii\diablo ii.exe

[Delay Settings]
This is what makes your bot run. All of these settings must be tweaked to your computer's standards or your likings. If you run multiple processes at a time, I'd recommend higher than what's preset or simply using what's already there.


Fifth: Editing the default settings
Note: The "//" is how scripters leave notes. The decompilers (D2Hackit) don't look at anything next to "//" or "/* .. */" Keep that in mind, it will make the process go mucho faster.

Go to your scripts/libs DIR (i.e. C:\d2\d2jsp_v0.24_full\scripts\libs\) and open "pwnsettings.d2l" with textpad/notepad/wordpad. If you can't find it, you installed the update wrong. Go back to step one and cry. Now. Note the top note: all skill names are case sensitive! Frozen Orb is not the same thing as frozen orb. Make sure you don't screw that up. If you are a sorceress, go to Sorceress Variables, etc. etc. The first thing you should come to (if applicable) is "Precastable Defensive Spells". For sorceresses, if you have Energy Shield, Chilling Armor and Thunder Storm, take the // out from in front of the prelist.push("Energy Shield"); and so forth. Read the "Attack Configuration" and do as it says. If you are able to teleport but don't have much Lightning Resistances, don't keep your "teledistance" as 10! Mine is at 4 and my merc tanks over pindle's minions and takes the lightning like a man. Since I am far away from pindle, I only use static and Frozen Orb, because nova wouldn't work too well. My SwitchOnKill is "true" because I have an occy/lidless in one hand to help lower pindle's health, and then I have a dual isted ali baba in the other hand so I switch My maxattacks is set to 20 but he's usually dead in about 5 orbs...

Your Mercenary Variables should be easy to configure... don't be dumb.

As for the rest: I have FreeSpace set to 3, I turned the taunts off, I'd recommend NOT to attack the zombies, and my Immunities/Resistances/Enchantments is set to the original configuration, if you don't like lightning, set enchantments[6]= to true;

(Get a tank merc with 75 all resists.. Mine is weaing Bul Kathos CS, Arkaine's and that unique spired helm..)

If you have any questions after this... *sigh* I suppose you can ask them.. but don't say I didn't post this.

Good Luck!

*squarero0t on USEast

 

[doug11]

SORRY FOR PUTTING UP THAT AGAIN IM NEW TOO THIS





Im having probs with this bot when i go too load it sais

[19:05:07] INI Successfully Loaded. 1 Diablo Instance will spawn.
[19:05:07] 1:Loading Diablo II
[19:05:28] 1:No cd inserted window detected, trying to close it
[19:05:33] 1:Waiting d2 window.
[19:05:48] 1:Attaching D2Hackit.
[19:05:48] 1:*** Unable to find a patch location.
[19:05:48] 1:Aborting thread
[19:05:48] No more active thread left
this didnt do it automaticly

so once you've clicked the d2jsploader it does everything automaticly ect.. loads the game / puts in my password / chooses the chara / makes the game .......................

ive got a coppied version of diablo i was wondering if that would effect it

 

[doug11]

[19:42:50] INI Successfully Loaded. 1 Diablo Instance will spawn.
[19:42:59] 1:*** Could not find a non-used Diablo II window. Either load failed, or your delay is not set high enough.
[19:42:59] 12 process is not alive, restarting thread in 30 seconds
[19:43:32] 1:Loading Diablo II
[19:43:48] 1:No cd inserted window detected, trying to close it
[19:43:53] 1:Waiting d2 window.
[19:44:08] 1:*** Could not find a non-used Diablo II window. Either load failed, or your delay is not set high enough.
[19:44:08] 12 process is not alive, restarting thread in 30 seconds


NOW it sais that

 

[WaKe-Up]

try having The diablo window open(in window mode) b4 you run the bot

 

[doug11]

[20:18:41] INI Successfully Loaded. 1 Diablo Instance will spawn.
[20:18:41] 1:Loading Diablo II
[20:18:57] 1:No cd inserted window detected, trying to close it
[20:19:02] 1:Waiting d2 window.
[20:19:17] 1:*** Could not find a non-used Diablo II window. Either load failed, or your delay is not set high enough.
[20:19:17] 12 process is not alive, restarting thread in 30 seconds



na still not working must be the no cd hack im useing?

 

[WaKe-Up]

I cant get my bot to use potions or chicken out......why?

 

[Mav]

PLZ HELP

Now this time could some plz give me an answer to my problem? I followed the instructions in the first post did everything in the configs. When i load D2jspLoader.exe it goes into my account selects my char goes into a channel makes a game and then just sits there. Why is this happening and what do i need to do to fix it?

 

[buggers]

Wake-Up
where is the = sign???

 

[WaKe-Up]

i think you need to delete -skiptobenet in the parameter path

 

[WaKe-Up]

var chickenlife=90; // This is your chicken life percentage. If you go below this life total, the game will exit.

Ive changed it around a bit to try and get it to work but that what it currently is.
(i had it 90 to try get it to work)

 

[MiNiAn]

ONE OF THE THINGS YOU MAY HAVE TO DO IS: DELETE THE PICKIT THING AND THEN IT MAY WORK, BTW IT RUNS OFF S N A G I T !!!!!!


____________________________________________________

MSG me if it works......
____________________________________________________

 

[WaKe-Up]

wich pickit thing

 

[MiNiAn]

ONE OF THE THINGS YOU MAY HAVE TO DO IS: DELETE THE PICKIT THING AND THEN IT MAY WORK, BTW IT RUNS OFF S N A G I T !!!!!!


__________________________________________________
__

MSG me if it works......
__________________________________________________
__

 

[WaKe-Up]

Wich pickit file