PINDLEBOT wont create game!?!

Ineedhelpbad

Member
Joined
Dec 24, 2002
Messages
11
Reaction score
0
Website
Visit site
Hey guys i have Pindlebot 3.4 and i set up the files etc. correctly i think, but there is a problem! I have it running in infinite mode in a window, it starts up fine, puts in my account and pass, joins the channel and places an away message, then, the cursor moves over quit and completely exits the game!! This just keeps repeating and wont create a game. Here is my pindlebot.ini file below, any help would be appreciated!

;==============================================================================
;--------------------------- slots configuration ------------------------------
;==============================================================================
;
; Specify separate slot section for every character you will use for pindleruns
; [slotname] must contain unique name for the slot which describes your
; character. If you have only one character for pindleruns set
; DefaultSlot=slotname in the [_default_] section
;
; AccountName=accountname
; Account to use (only for infinite mode).
; If left blank, you will be prompted for it
;
; Password=password
; Password for the account. If left blank, you will be prompted for it
;
; PlayerName=playername
; The characters name here
;
; CharacterLocation=number
; character place in the 8-char matrix, the matrix is
; 1 2
; 3 4
; 5 6
; 7 8
;
; Difficulty=number
; 1 = Normal
; 2 = Nightmare
; 3 = Hell
;
; RunSpeed=number
; How fast your character should run. This is *NOT* the amount of r/w your
; character has. Default is 100. If you blackwall too much, decrease this value
;
; VisitLarzuk=1-999
; how often should larzuk be visited?
; e.g. 0=never, 1=every time, 10=every 10 times and so on
;
; USE F1-F12 KEYS FOR CHARACTER SKILLS
; KEYS A-Z (except I and W) and NUMPAD NUMBERS ARE RESERVED
;
; Precast=Key,Delay;Key,Delay; ...
; configures passive spells
; ie. Sorc's Energy shield, Barb's War cry... which will be cast after entering
; red portal.
; Example for sorceress: Precast=F5,200;F6,200;
; F5=Energy shield, F6=Shiver Armor
;
; Teleport=Key,Delay;
; specify if teleport should be used
; Leave blank to disable
; Example: Teleport=F4,600;
; F4=Teleport
;
; Sequence=Key,Repeat,Click,Delay;Key,Repeat,Click,Delay; ...
; key = Key to press
; Repeat = # of time to attack
; Click = mouse button to use 0 = none 1 = left click 2 = right click
; Delay = pause between attacks
;
; attacking/casting Sequence, configure this part very carefull to match your character skills.
; Example for Ice Orb sorc: Sequence=F1,1,2,300;F2,3,2,300;F1,10,2,1300;
; This will Cast Ice Orb (F1) once, wait 300 milliseconds; cast Static (F2)
; 3 times, wait 300 milliseconds each time, cast Ice Orb (F1) 5 times,
; wait 1300 milliseconds each time and using right click each time.
;
; NeedMerc=0/1
; disables (0) / enables (1) hiring of your merc if either of you die
;
; ChickenLife=0-99
; default 33; % life to chicken on
;
; SkipMalahLife=0-99
; default 90) If you have x% life, skip the trip to malah.
;
; HealLifeAt=0-99
; default 50 If you have x% life, use a pot (0-99; def 50)
;
; HirelingHealLifeAt=0-99
; default 50 if your merc has x% life, use a pot
;
; HirelingChickenLife=0-99
; default 20 if your merc has x% life, chicken out

[theo]
Accountname=mypassis here
Password=a1sh0tkill
PlayerName=XxMage_FistxX
CharacterLocation=1
Difficulty=3
VisitLarzuk=10
RunSpeed=75
Teleport=
Precast=f4,200;f5,200
Sequence=f3,1,2,300;f1,2,2,300;f2,13,2,1300;
NeedMerc=1
SkipMalahLife=90
HealLifeAt=60
ChickenLife=30
HirelingHealLifeAt=60
HirelingChickenLife=30
ShopbotBrowse=0

Thx for ur help!!!!
 

LikQuiD

Member!
Joined
Dec 16, 2002
Messages
105
Reaction score
0
Location
Probally not near you
Website
Visit site
Down at the bottom of config raise the create game by bout 3k like this LooK!!

dClick=250
dStartDiablo=10000
dMoveDiablo=1500
dAccLogin=2500
dCharLogin=3000
dHackItStart=1250
dActivateWindow=1000
dWaitError=7000
dCloseDiablo=3000
dCreateGame=10000 <------- Use to be 4000
dChangeAct=2000
dWaitUserClose=5000
dChannelAction=1500
dLeaveGame=4000
dEnterRedPortal=2000
dTradeTime=1000
 

Ultmose

BattleForums Addict
Joined
Dec 22, 2002
Messages
628
Reaction score
0
Website
Visit site
unhandled exception happens when grapchics interfere, close programs running ni the background, like kazaa, msn and it might help,,,

just "might":
 

Ineedhelpbad

Member
Joined
Dec 24, 2002
Messages
11
Reaction score
0
Website
Visit site
O and another thing... i had to switch my account name and pass around because it was typing my pass into the account name and the account name in my password, so i switched them..... that shuldnt have cause the problem shuld it?
 

voice

Member!
Joined
Dec 22, 2002
Messages
123
Reaction score
0
Location
North Carolina
Website
www.angelfire.com
put your account name hwre it says account name and your pass where it says pass...
restart your comp connect to the net(if neccesary)and start the bot...see what happens
 

voice

Member!
Joined
Dec 22, 2002
Messages
123
Reaction score
0
Location
North Carolina
Website
www.angelfire.com
The problem isnt your pindlebot.ini make sure you have it filled out just like it says to even your account info...although it does look like your missing the default slot= variable it looks like this
; pindlebot.ini to use with Infinite PindleBot v3.4


;==============================================================================
;----------------------------- global section ---------------------------------
;==============================================================================
;
; NinjaMode=1 will will do the runs without restarting, acc data not required
; NinjaMode=0 will will do the runs in infinite mode, account data is required
;
; DefaultSlot=slotname sets default slot with character to use in pindleruns
; if DefaultSlot= you will be prompted for the slotname at startup
;
; Channel=channelname sets the channel you will be in during the runs
;
; AwayMessage=awaymessage will set /away message during the runs
;
; PickupTime=milliseconds is the time the Bot will wait to pick up items
; 1 second = 1000 milliseconds, characters without teleport should use higher
; values, especially bowazons
;
; MoveDiablo=0/1 disable/enable Move Diablo to top left corner of screen
;
; Debug=0/1 disable/enable debug messages to PDebug.txt default 0

[_global_]
NinjaMode=0
DefaultSlot=theo <------------HERE
Channel=
AwayMessage=
PickupTime=4500
MoveDiablo=0

;==============================================================================
;--------------------------- slots configuration ------------------------------
;==============================================================================
;
; Specify separate slot section for every character you will use for pindleruns
; [slotname] must contain unique name for the slot which describes your
; character. If you have only one character for pindleruns set
; DefaultSlot=slotname in the [_default_] section
;
; AccountName=accountname
; Account to use (only for infinite mode).
; If left blank, you will be prompted for it
;
; Password=password
; Password for the account. If left blank, you will be prompted for it
;
; PlayerName=playername
; The characters name here
;
; CharacterLocation=number
; character place in the 8-char matrix, the matrix is
; 1 2
; 3 4
; 5 6
; 7 8
;
; Difficulty=number
; 1 = Normal
; 2 = Nightmare
; 3 = Hell
;
; RunSpeed=number
; How fast your character should run. This is *NOT* the amount of r/w your
; character has. Default is 100. If you blackwall too much, decrease this value
;
; VisitLarzuk=1-999
; how often should larzuk be visited?
; e.g. 0=never, 1=every time, 10=every 10 times and so on
;
; USE F1-F12 KEYS FOR CHARACTER SKILLS
; KEYS A-Z (except I and W) and NUMPAD NUMBERS ARE RESERVED
;
; Precast=Key,Delay;Key,Delay; ...
; configures passive spells
; ie. Sorc's Energy shield, Barb's War cry... which will be cast after entering
; red portal.
; Example for sorceress: Precast=F5,200;F6,200;
; F5=Energy shield, F6=Shiver Armor
;
; Teleport=Key,Delay;
; specify if teleport should be used
; Leave blank to disable
; Example: Teleport=F4,600;
; F4=Teleport
;
; Sequence=Key,Repeat,Click,Delay;Key,Repeat,Click,Delay; ...
; key = Key to press
; Repeat = # of time to attack
; Click = mouse button to use 0 = none 1 = left click 2 = right click
; Delay = pause between attacks
;
; attacking/casting Sequence, configure this part very carefull to match your character skills.
; Example for Ice Orb sorc: Sequence=F1,1,2,300;F2,3,2,300;F1,10,2,1300;
; This will Cast Ice Orb (F1) once, wait 300 milliseconds; cast Static (F2)
; 3 times, wait 300 milliseconds each time, cast Ice Orb (F1) 5 times,
; wait 1300 milliseconds each time and using right click each time.
;
; NeedMerc=0/1
; disables (0) / enables (1) hiring of your merc if either of you die
;
; ChickenLife=0-99
; default 33; % life to chicken on
;
; SkipMalahLife=0-99
; default 90) If you have x% life, skip the trip to malah.
;
; HealLifeAt=0-99
; default 50 If you have x% life, use a pot (0-99; def 50)
;
; HirelingHealLifeAt=0-99
; default 50 if your merc has x% life, use a pot
;
; HirelingChickenLife=0-99
; default 20 if your merc has x% life, chicken out

[theo] <----------and here should match
Accountname=
Password=
PlayerName=
CharacterLocation=
Difficulty=3
VisitLarzuk=10
RunSpeed=60
Teleport=
Precast=
Sequence=
NeedMerc=1
SkipMalahLife=90
HealLifeAt=60
ChickenLife=20
HirelingHealLifeAt=60
HirelingChickenLife=30
ShopbotBrowse=0


open your pindlebot.aut
its the auto-it script itself and check the actual scripting it should look like this

the section that logs you in...

LogIntoAcc:
IfEqual, WinStats, 0, Gosub, WinSize
SetEnv, tmpX, 740
SetEnv, tmpY, 485
Gosub, SubLeftClick
Sleep, %dClick%
SetEnv, tmpX, 335
SetEnv, tmpY, 340
Gosub, SubLeftClick
Sleep, %dClick%
Send, {DEL 20}
Sleep, %dClick%
Send, {BS 4}
Sleep, %dClick%
SetEnv, clipboard, %accname%
Send, ^{v}
Sleep, %dClick%
Send, {TAB}
Sleep, %dClick%
SetEnv, clipboard, %accpass%
Send, ^{v}
Sleep, %dClick%
Send, {ENTER}
Sleep, %dAccLogin%
SetEnv, clipboard, _UNSET_
Gosub, CheckDiabloState
Return

this section covers from chat to game creation completion

PerformChatActions:
SetEnv, clipboard, /join %channel%
SetEnv, tmpX, 40
SetEnv, tmpY, 430
Gosub, SubLeftClick
Sleep, %dClick%
Send, ^{v}
Sleep, %dClick%
Send, {ENTER}
Sleep, %dChannelAction%
Gosub, CheckDiabloState
SetEnv, clipboard, /away %awaystring%
SetEnv, tmpX, 40
SetEnv, tmpY, 430
Gosub, SubLeftClick
Sleep, %dClick%
Send, ^{v}
Sleep, %dClick%
Send, {ENTER}
Sleep, %dChannelAction%
Gosub, CheckDiabloState
Return

CheckIfInChat:
SetEnv, tmpX, 400
SetEnv, tmpY, 430
Gosub, SubLeftClick
Sleep, %dClick%
SetEnv, tmpX, 645
SetEnv, tmpY, 460
Gosub, SubLeftClick
Sleep, %dClick%
Send, {ESC}
Sleep, %dClick%
SetEnv, tmpX, 645
SetEnv, tmpY, 460
Gosub, SubLeftClick
Sleep, %dClick%
Send, {ESC}
Sleep, %dClick%
SetEnv, tmpX, 645
SetEnv, tmpY, 460
Gosub, SubLeftClick
Sleep, %dClick%
Send, {ESC}
Sleep, %dClick%
SetEnv, tmpX, 645
SetEnv, tmpY, 460
Gosub, SubLeftClick
Sleep, %dClick%
Send, {ESC}
Sleep, %dClick%
Gosub, CheckDiabloState
Return

CreateTheGame:
SetEnv, tmpX, 645
SetEnv, tmpY, 460
Gosub, SubLeftClick
Sleep, %dClick%
StringLeft, LvlPrefix , SlotName, 3
Random, name, 100000, 900000
Random, pass, 100000, 900000
SetEnv, clipboard, %LvlPrefix%%name%
Send, ^{v}
Sleep, %dClick%
Send, {TAB}
Sleep, %dClick%
SetEnv, clipboard, %pass%
Send, ^{v}
Sleep, %dClick%
;set default coordinates
IfEqual, Diff, 3, SetEnv, tmpX, 706
IfEqual, Diff, 2, SetEnv, tmpX, 566
IfEqual, Diff, 1, SetEnv, tmpX, 441
SetEnv, tmpY, 374
Gosub, SubLeftClick
Sleep, %dClick%
SetEnv, tmpX, 680
SetEnv, tmpY, 420
Gosub, SubLeftClick
SetEnv, i, 20

StartCheckIfInGame:
IfExist,%A_SCRIPTDIR%\\ingame.tmp, Goto, EndCheckIfInGame
Sleep, 1000
EnvSub, i, 1
IfGreater, i, 0, Goto, StartCheckIfInGame
Goto, IWantToRestart

EndCheckIfInGame:
Sleep, %dCreateGame%
Gosub, CheckDiabloState
Return

p.s. anytime pindle bot exits it will read unhandled exception the only time you need to worry about it is if pindle bot fails to reload after this or if your comp freezes other than that its completely normal

the popup should say

Diablo II Exception
UNHANDLED EXCEPTION
ACCESS VIOLATION (c0000005)

perfectly normal

if you continue encountering problems after compring your auto-it scripting to what ive posted here i suggest finding another bot...
 

NewPosts

New threads

Top