Blackz
Member
Well when i try toi start it up it says Slot is missing or damaged. This is my .ini file:
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; mephbot.ini by Syadasti
;;
;; For Mephbot v0.91
;;
;; IF YOU HAVE NOT READ MEPHBOT.TXT AND README.TXT, PLEASE DON'T MAIL ME
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;=============================================================================
;----------------------------- Global Section --------------------------------
;=============================================================================
;
; DefaultSlot=<slotname> Sets default slot with character to use in Meph runs
; if DefaultSlot=you will be prompted for the slotname at startup
;
[_global_]
DefaultSlot=slot 5
;=============================================================================
;--------------------------- slots configuration -----------------------------
;=============================================================================
;
; Specify separate slot names for every character you will use for Meph runs.
; [<slotname>] must contain a unique name for the slot which describes your
; character. If you have only one character for Meph runs, set
; DefaultSlot=<slotname> in the [_global_] section
;
; AccountName=<accountname> Battle.net account name to use
;
; Password=<password> Password for this account. If you leave this empty, you
; will be prompted for the password each time you start bot.
;
; CharacterLocation=<number> Character's place in the character selection
; matrix, which looks like:
; 1 2
; 3 4
; 5 6
; 7 8
;
[slot1]
Accountname=(Deleted for obvious reasons)
Password=(Deleted for obvious reasons)
CharacterLocation=5
;[slot2]
;Accountname=Accountname
;Password=
;CharacterLocation=1
;...
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; NOTE: All time values in the [default] section are in TENTHS of a second
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; [default]
;; Unless otherwise indicated, settings are enable=1, disable = 0.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[default]
Debug=1
DebugToScreen=0
;; SEE THE SECTION AT THE END OF THIS FILE FOR DEBUG CODES
;;
;; "debug all"=131071 but "0" also is "debug all" -- VOLUMINOUS OUTPUT
;; Includes packet dumps, packet IDs, information on linked list traversals
;; and message queue servicing.
;; NOT RECOMMENDED
;;
;; This will produce a large amount of information, without packet dumps, etc.
;;DebugLevel=1023
;;
;; This will get log just state transitions, basic progress events, and some
;; uncategorized events.
;;DebugLevel=3
;;
;; This will log the default events, plus packet dumping and identification
;;DebugLevel=6143
;;
DebugLevel=3
Windowed=1
MoveWindowToTopLeftCorner=0
Sound=0
WeaponSwitch=1
OverheadInfo=1
;; This will default to the first 3 characters of the account name if blank
;; otherwise, only at most the first 3 characters of it will be used
;;
GameNamePrefix=
;; List your protection spells here. The first BLANK entry will terminate
;; processing, so make sure if you have less than 8 that they're in order
;; (1, 2, 3)
;;
;; It's a good idea to repeat your most critical protection spells at least
;; once in this list.
;;
;; You MUST have at least one ProtectionSkill set up here. Failure to do
;; do will result in maximum mana detection failures.
;;
ProtectionSkill1=Thunder Storm
ProtectionSkill2=Energy Shield
ProtectionSkill3=Shiver Armor
ProtectionSkill4=Energy Shield
ProtectionSkill5=Shiver Armor
ProtectionSkill6=
ProtectionSkill7=
ProtectionSkill8=
;; NOTE: You will cast the maximum number of spells in the shortest time
;; if your primary and secondary attacks are on DIFFERENT mouse buttons.
;;
;; See the end of this file for the list of skills supported
;;
;; This is your principal attack.
;;
PrimaryAttackSkill=Frozen Orb
PrimaryAttackHand=Left
;; This is a quick low-damage attack launched during the Principal attack's
;; spell timer. Set it to Ice Bolt or something with very low mana usage if
;; you really don't want to use it at all
;;
;; Using a timered spell (firewall, frozen orb, meteor) here will have
;; unpredictable effects, and is not supported.
;;
SecondaryAttackSkill=Telekinesis
SecondaryAttackHand=Right
;; The sum of your Fast Cast bonuses from your PRIMARY equipment (not weapon
;; switch)
;;
FastCastPercent=90
;; Dodging on(1)/off(0)
;;
Dodging=1
;; These are percentages of his total life
;; For MephMinHealthToCastStatic use 25 in norm, 33 in nightmare, 50 in hell
;;
MephMinHealthToCastStatic=50
MephWeaponSwitchHealth=10
;; We'll drink a healing potion if Life falls below this level
;;
HealingLifePercent=50
;; We'll quit game immediately if Life falls below this level
;;
;; Set to zero to disable this feature
;;
ChickenLifePercent=20
;; We'll quit game immediately if Life AND Mana fall below these levels at
;; the same time
;;
ComboChickenLifePercent=40
ComboChickenManaPercent=10
;; We'll wait by the stairs until we recover this much Mana before starting
;; the Meph run
;;
;; Set to 100 or above to disable this feature
;;
MinManaPercentBeforeAttackRun=100
;; The away message will be generated randomly if this is left blank
;;
AwayMessage=I am Mephing, Sorry, Message me later. (I should be back in a few hours)
;; How many games between stash visits to deposit gold and unid'd items.
;;
;; Set this relatively low to keep inventory clear.
;;
StashVisitGameNumber=10
;; If this is enabled (1), we'll continue running indefinitely regardless
;; of the state of the player inventory
;;
ContinueWhenInventoryFull=2
;; MinDistanceToMeph should be set as low as necessary if you're using an
;; omnidirectional secondary attack
;;
MinDistanceToMeph=8
MaxDistanceToMeph=15
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; You shouldn't really need to adjust anything below here.
;; If you do, please let me know about it.
;;
;; NOTE: All time values in the [default] section are in TENTHS of a second
;;
;; DelayStep tenths of a second between steps
;; (10 min with +30% r/w sorc)
;; DelayGameLoad pause for game load and corpse pickup
;; DelayExitGame pause before issuing exit command
;; DelayStartNewGame pause before exiting game
;; DelayCreateGame pause before creating new game
;; DelayAfterDeath pause after player dies before restart
;; DelayOverheadUpdate how often we update overhead status message
;; DelayBeforePrecast pause before casting protection spells
;; (and therefore after taking stairs/waypoint)
;; DelayPickup pause for item pickup after tele to corpse
;;
;; MaxTickRestart pause for game enter before retry
;; MaxTickWaypoint max time from game start to waypoint
;; MaxTickStairs max time from waypoint to stairs down
;; MaxTickGame tenths of a second to complete a game
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
DelayStep=10
DelayGameLoad=50
DelayExitGame=20
DelayStartNewGame=60
DelayCreateGame=80
DelayAfterDeath=30
DelayOverheadUpdate=5
DelayBeforePrecast=5
DelayPickup=10
MaxTickRestart=250
MaxTickWaypoint=400
MaxTickStairs=600
MaxTickGame=1800
;; this is set automatically now by the AutoIT script
MephbotDir=C:\MY DOCUMENTS\CASEY'S STUFF\MEPHBOT0.91\
LogFileName=mephbotlog.txt
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; NOTE: all time values below are in MILLISECONDS
;;
;=============================================================================
;--------------------------- expert configuration ----------------------------
;=============================================================================
;
; EXPERT SETTINGS, DONT CHANGE THIS UNLESS YOU KNOW WHAT YOU'RE DOING!
;
; D2Path=<path> directory where Diablo II is located. Usually you don't need
; to specify the path, the bot will get the Path from the registry.
; Example: D2Path=C:\Program Files\Diablo II
;
; D2Executable=<executablefile> is the name of Diablo II executable
;
; D2Parameter=<parameters>
;
; D2Title=<windowtitle>
;
; D2Kill=<threadkiller> (pv or d2kill)
; D2Kill=(blank) try to just use internal routines to kill d2
;
; D2HackIt=<d2hackit executable>
;
; Delay syntax: <Delay type>=<value in milliseconds>
;
; [Delay type] [Short description]
; dClick delay for mouse clicks
; dStartDiablo starting diablo
; dAccLogin account login
; dCharLogin character login into chat channel
; dHackItStart starting D2HackIt (with pickit)
; dWaitError waiting error
; dCloseDiablo closing diablo
; dWaitUserClose waiting for user to close bot
[_expert_]
D2Path=
D2Executable=
;; add -direct -txt here if you use D2Accelerator
D2Parameter=-skiptobnet -res800 -lq -title "Diablo II"
D2Title=Diablo II
;;D2Kill=pv -kf Game.exe "Diablo*II.exe" D2Loader.exe
D2Kill=d2kill
D2HackIt=Loader.exe
dClick=150
dStartDiablo=12000
dAccLogin=3000
dCharLogin=3000
dHackItStart=3000
dWaitError=8000
dCloseDiablo=2000
dWaitUserClose=20000
dChannelAction=2000
I left out a little bit because it was too long and had nothing to do with my problem.
Please help me, I would really like to know.
My character is locaqted in slot 5 in the matrix thingy.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; mephbot.ini by Syadasti
;;
;; For Mephbot v0.91
;;
;; IF YOU HAVE NOT READ MEPHBOT.TXT AND README.TXT, PLEASE DON'T MAIL ME
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;=============================================================================
;----------------------------- Global Section --------------------------------
;=============================================================================
;
; DefaultSlot=<slotname> Sets default slot with character to use in Meph runs
; if DefaultSlot=you will be prompted for the slotname at startup
;
[_global_]
DefaultSlot=slot 5
;=============================================================================
;--------------------------- slots configuration -----------------------------
;=============================================================================
;
; Specify separate slot names for every character you will use for Meph runs.
; [<slotname>] must contain a unique name for the slot which describes your
; character. If you have only one character for Meph runs, set
; DefaultSlot=<slotname> in the [_global_] section
;
; AccountName=<accountname> Battle.net account name to use
;
; Password=<password> Password for this account. If you leave this empty, you
; will be prompted for the password each time you start bot.
;
; CharacterLocation=<number> Character's place in the character selection
; matrix, which looks like:
; 1 2
; 3 4
; 5 6
; 7 8
;
[slot1]
Accountname=(Deleted for obvious reasons)
Password=(Deleted for obvious reasons)
CharacterLocation=5
;[slot2]
;Accountname=Accountname
;Password=
;CharacterLocation=1
;...
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; NOTE: All time values in the [default] section are in TENTHS of a second
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; [default]
;; Unless otherwise indicated, settings are enable=1, disable = 0.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[default]
Debug=1
DebugToScreen=0
;; SEE THE SECTION AT THE END OF THIS FILE FOR DEBUG CODES
;;
;; "debug all"=131071 but "0" also is "debug all" -- VOLUMINOUS OUTPUT
;; Includes packet dumps, packet IDs, information on linked list traversals
;; and message queue servicing.
;; NOT RECOMMENDED
;;
;; This will produce a large amount of information, without packet dumps, etc.
;;DebugLevel=1023
;;
;; This will get log just state transitions, basic progress events, and some
;; uncategorized events.
;;DebugLevel=3
;;
;; This will log the default events, plus packet dumping and identification
;;DebugLevel=6143
;;
DebugLevel=3
Windowed=1
MoveWindowToTopLeftCorner=0
Sound=0
WeaponSwitch=1
OverheadInfo=1
;; This will default to the first 3 characters of the account name if blank
;; otherwise, only at most the first 3 characters of it will be used
;;
GameNamePrefix=
;; List your protection spells here. The first BLANK entry will terminate
;; processing, so make sure if you have less than 8 that they're in order
;; (1, 2, 3)
;;
;; It's a good idea to repeat your most critical protection spells at least
;; once in this list.
;;
;; You MUST have at least one ProtectionSkill set up here. Failure to do
;; do will result in maximum mana detection failures.
;;
ProtectionSkill1=Thunder Storm
ProtectionSkill2=Energy Shield
ProtectionSkill3=Shiver Armor
ProtectionSkill4=Energy Shield
ProtectionSkill5=Shiver Armor
ProtectionSkill6=
ProtectionSkill7=
ProtectionSkill8=
;; NOTE: You will cast the maximum number of spells in the shortest time
;; if your primary and secondary attacks are on DIFFERENT mouse buttons.
;;
;; See the end of this file for the list of skills supported
;;
;; This is your principal attack.
;;
PrimaryAttackSkill=Frozen Orb
PrimaryAttackHand=Left
;; This is a quick low-damage attack launched during the Principal attack's
;; spell timer. Set it to Ice Bolt or something with very low mana usage if
;; you really don't want to use it at all
;;
;; Using a timered spell (firewall, frozen orb, meteor) here will have
;; unpredictable effects, and is not supported.
;;
SecondaryAttackSkill=Telekinesis
SecondaryAttackHand=Right
;; The sum of your Fast Cast bonuses from your PRIMARY equipment (not weapon
;; switch)
;;
FastCastPercent=90
;; Dodging on(1)/off(0)
;;
Dodging=1
;; These are percentages of his total life
;; For MephMinHealthToCastStatic use 25 in norm, 33 in nightmare, 50 in hell
;;
MephMinHealthToCastStatic=50
MephWeaponSwitchHealth=10
;; We'll drink a healing potion if Life falls below this level
;;
HealingLifePercent=50
;; We'll quit game immediately if Life falls below this level
;;
;; Set to zero to disable this feature
;;
ChickenLifePercent=20
;; We'll quit game immediately if Life AND Mana fall below these levels at
;; the same time
;;
ComboChickenLifePercent=40
ComboChickenManaPercent=10
;; We'll wait by the stairs until we recover this much Mana before starting
;; the Meph run
;;
;; Set to 100 or above to disable this feature
;;
MinManaPercentBeforeAttackRun=100
;; The away message will be generated randomly if this is left blank
;;
AwayMessage=I am Mephing, Sorry, Message me later. (I should be back in a few hours)
;; How many games between stash visits to deposit gold and unid'd items.
;;
;; Set this relatively low to keep inventory clear.
;;
StashVisitGameNumber=10
;; If this is enabled (1), we'll continue running indefinitely regardless
;; of the state of the player inventory
;;
ContinueWhenInventoryFull=2
;; MinDistanceToMeph should be set as low as necessary if you're using an
;; omnidirectional secondary attack
;;
MinDistanceToMeph=8
MaxDistanceToMeph=15
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; You shouldn't really need to adjust anything below here.
;; If you do, please let me know about it.
;;
;; NOTE: All time values in the [default] section are in TENTHS of a second
;;
;; DelayStep tenths of a second between steps
;; (10 min with +30% r/w sorc)
;; DelayGameLoad pause for game load and corpse pickup
;; DelayExitGame pause before issuing exit command
;; DelayStartNewGame pause before exiting game
;; DelayCreateGame pause before creating new game
;; DelayAfterDeath pause after player dies before restart
;; DelayOverheadUpdate how often we update overhead status message
;; DelayBeforePrecast pause before casting protection spells
;; (and therefore after taking stairs/waypoint)
;; DelayPickup pause for item pickup after tele to corpse
;;
;; MaxTickRestart pause for game enter before retry
;; MaxTickWaypoint max time from game start to waypoint
;; MaxTickStairs max time from waypoint to stairs down
;; MaxTickGame tenths of a second to complete a game
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
DelayStep=10
DelayGameLoad=50
DelayExitGame=20
DelayStartNewGame=60
DelayCreateGame=80
DelayAfterDeath=30
DelayOverheadUpdate=5
DelayBeforePrecast=5
DelayPickup=10
MaxTickRestart=250
MaxTickWaypoint=400
MaxTickStairs=600
MaxTickGame=1800
;; this is set automatically now by the AutoIT script
MephbotDir=C:\MY DOCUMENTS\CASEY'S STUFF\MEPHBOT0.91\
LogFileName=mephbotlog.txt
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; NOTE: all time values below are in MILLISECONDS
;;
;=============================================================================
;--------------------------- expert configuration ----------------------------
;=============================================================================
;
; EXPERT SETTINGS, DONT CHANGE THIS UNLESS YOU KNOW WHAT YOU'RE DOING!
;
; D2Path=<path> directory where Diablo II is located. Usually you don't need
; to specify the path, the bot will get the Path from the registry.
; Example: D2Path=C:\Program Files\Diablo II
;
; D2Executable=<executablefile> is the name of Diablo II executable
;
; D2Parameter=<parameters>
;
; D2Title=<windowtitle>
;
; D2Kill=<threadkiller> (pv or d2kill)
; D2Kill=(blank) try to just use internal routines to kill d2
;
; D2HackIt=<d2hackit executable>
;
; Delay syntax: <Delay type>=<value in milliseconds>
;
; [Delay type] [Short description]
; dClick delay for mouse clicks
; dStartDiablo starting diablo
; dAccLogin account login
; dCharLogin character login into chat channel
; dHackItStart starting D2HackIt (with pickit)
; dWaitError waiting error
; dCloseDiablo closing diablo
; dWaitUserClose waiting for user to close bot
[_expert_]
D2Path=
D2Executable=
;; add -direct -txt here if you use D2Accelerator
D2Parameter=-skiptobnet -res800 -lq -title "Diablo II"
D2Title=Diablo II
;;D2Kill=pv -kf Game.exe "Diablo*II.exe" D2Loader.exe
D2Kill=d2kill
D2HackIt=Loader.exe
dClick=150
dStartDiablo=12000
dAccLogin=3000
dCharLogin=3000
dHackItStart=3000
dWaitError=8000
dCloseDiablo=2000
dWaitUserClose=20000
dChannelAction=2000
I left out a little bit because it was too long and had nothing to do with my problem.
Please help me, I would really like to know.
My character is locaqted in slot 5 in the matrix thingy.
