Nightfall_d2
Member!
Ok iLL Start from the top here
-------------------------------
Step 1
-------------------------------
Download & Unzip JHJ PindleBot: Click here to Download
-------------------------------
Step 2
-------------------------------
Open the 'RunPCenter' and follow the ENGLISH on this picture
Charslot table gos as followed:
0 1
2 3
4 5
6 7
(Clicking CONFIG will popup the rest of RunPCenter) - fill in the blanks and click [ + ] when done when i type [] im refering to a button, then close the RunPCenter and open it again
click on [ >> ] then open LOADER.EXE in your jhj folder
the bot should now be running, if it isnt please contact me at afterlife_69@hotmail.com and ill help u out
-------------------------------
Step 3
-------------------------------
Now is where we change a few other things - to get arround the new bot protection (RealmDown)
Go to ur pbot folder, open RunPBotSor.ini
*Also set NORM/NM/HELL in here
look for the following lines:
CreateDelay=25
Difficult=2
Change Create Delay to 101 from 25
then set Difficult to 0/1/2
0 = Normal
1 = Nightmare
2 = Hell
choose where u are
-------------------------------
Step 4
-------------------------------
Open RunPCentre again
Go to the ATACK/PICKIT Config
and set ur atacks / immunes
now exit RunPCentre and re-open
-------------------------------
Step 5
-------------------------------
in RunPCentre click the [ >> ] symbol
and open LOADER untill the title of the d2 window changes
now your bot should be started and running
-------------------------------
This Concludes the JHJ Guide
*Make sure char is in act5 before starting bot
** Email me @ afterlife_69@hotmail.com if u have any problems
-------------------------------
-------------------------------
Step 1
-------------------------------
Download & Unzip JHJ PindleBot: Click here to Download
-------------------------------
Step 2
-------------------------------
Open the 'RunPCenter' and follow the ENGLISH on this picture
Charslot table gos as followed:
0 1
2 3
4 5
6 7
(Clicking CONFIG will popup the rest of RunPCenter) - fill in the blanks and click [ + ] when done when i type [] im refering to a button, then close the RunPCenter and open it again
click on [ >> ] then open LOADER.EXE in your jhj folder
the bot should now be running, if it isnt please contact me at afterlife_69@hotmail.com and ill help u out
-------------------------------
Step 3
-------------------------------
Now is where we change a few other things - to get arround the new bot protection (RealmDown)
Go to ur pbot folder, open RunPBotSor.ini
*Also set NORM/NM/HELL in here
look for the following lines:
CreateDelay=25
Difficult=2
Change Create Delay to 101 from 25
then set Difficult to 0/1/2
0 = Normal
1 = Nightmare
2 = Hell
choose where u are
-------------------------------
Step 4
-------------------------------
Open RunPCentre again
Go to the ATACK/PICKIT Config
and set ur atacks / immunes
now exit RunPCentre and re-open
-------------------------------
Step 5
-------------------------------
in RunPCentre click the [ >> ] symbol
and open LOADER untill the title of the d2 window changes
now your bot should be started and running
-------------------------------
This Concludes the JHJ Guide
*Make sure char is in act5 before starting bot
** Email me @ afterlife_69@hotmail.com if u have any problems
-------------------------------
